(908) 628-1070

How CoolSculpting Can Help You Avoid Loose Skin in the Upper Arms

Arm fat removal is one of the most common procedures performed for cosmetic surgery, and while it's effective at getting rid of unwanted fat in the upper arm, patients are often left with excess arm skin after the treatment. This can be an issue since you would require a skin tightening treatment or another cosmetic procedure to get the excess skin removed.

So how does CoolSculpting treatment help with getting rid of fatty tissue in the upper arms without leaving loose skin behind? CoolSculpting results use a revolutionary fat freezing treatment that removes excess fat without harming the essential fat cells in your body. Since it doesn't require any incisions, injections, or any other invasive methods, it's perfect for getting rid of stubborn arm fat without leaving sagging skin behind.

Freeze Away Your Stubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!

How the CoolSculpting Procedure Avoids Sagging Skin Formation

Sagging skin usually develops because of rapid weight loss or weight gain. This might happen because of natural causes, but it's also caused by procedures like plastic surgery, an arm lift surgery (brachioplasty), a tummy tuck, a thigh lift, or any kind of liposuction treatment. Because the fat removal process immediately takes away a significant part of your body's fat reserves without giving the skin time to adjust, you end up with sagging skin.

However, the CoolSculpting method isn't like any surgical procedure used for fat removal. It uses a fat-freezing treatment to destroy any excess fat from the inside, leaving subcutaneous fat (the good kind of fat) unharmed. You don't require any surgery or postoperative healing, and you're free to resume your normal activities soon after your treatment is done.

Once the fat freezing treatment works on your fat cells, they slowly start to implode and turn into waste material that your body can naturally remove from your system. The entire process can take a few weeks to make sure that all of the treated fat cells are gone, but the treated area's ability to store and expand its fat is considerably cut down.

CoolSculpting's versatility in treating excess fat makes it work on almost all kinds of excess fat you can find in the body, like the outer thighs, inner thighs, abdomen, or a double chin. The slow removal of the treated fat deposits means that your skin has time to adjust to the outgoing fat, which makes it less likely to go through the same sagging skin that other weight loss methods can leave you with. Combining it with other skin tightening treatments or collagen-boosting products, you'll never have to worry about unwanted fat or your arm skin looking less than its best ever again.

Why CoolSculpting Is Your Best Choice for Removing Excess Fat From the Arm

Powerful young woman on a yellow background

Even without the benefit of avoiding loose skin after your treatment, CoolSculpting is still one of the best options you can look into for removing unwanted fat from the arms. Typically, fat deposits in the arm area can be difficult to remove without radically changing the entire shape and curvature of the arm, or without extensive surgery and other procedures.

But CoolSculpting doesn't work that way. With the right CoolSculpting applicator, your CoolSculpting procedure can precisely shave away any excess fat from your arm for an effective method of body sculpting unmatched by most fat reduction treatments on the market right now. One of the latest developments that make CoolSculpting even better for removing unwanted fat from your arms is the FDA-approved CoolSculpting Petite applicator.

This applicator is a special CoolSculpting handpiece that's specifically targeted for the arms, which allows it to manage flabby arms and armpit fat far easier compared to other CoolSculpting methods. Body contouring becomes even easier with its ability to reach fat in normally hard-to-access areas, which makes it extremely effective at reducing excess skin development.

Other Treatments You Can Try With Your CoolSculpting Treatment

With no invasive methods, fast recovery, and little work on your part to get rid of the unwanted fat after your initial CoolSculpting treatment, it's an effective fat reduction treatment for almost every patient. But if you want to improve or add on to the effects of your CoolSculpting treatment, here are some other things you can try:

Dermal Fillers

Dermal fillers are extremely effective at skin rejuvenation since you can choose from a variety of brands with different effects and methods of action. The best one you can combine with a CoolSculpting treatment is any dermal fillers that can boost the collagen production of your skin since it complements the gradual process of your body, removing the treated fat cells from your body.

Keep in mind that dermal fillers are not always applicable to all CoolSculpting treatments, especially if you had a lot of fat removed from your arms. Dermal fillers can't replace significant amounts of lost fat — at least not immediately — so you should keep any dermal filler treatments to a minimum until all the fat has drained from your system.

Skin Tightening Treatments

Skin tightening treatments like ultrasound therapy have seen a rapid increase in use over the past few years as an alternative to cosmetic injectables. They work by stimulating the collagen production of your skin, increasing cell growth and repair, and helping it become more resilient against wear and tear. These treatments are easily done with little to no postoperative recovery required, which makes them complement CoolSculpting results very well.

While CoolSculpting treatments have shown some promising results with skin tightening, it's still a fat reduction method and has the best results when used that way. Fortunately, most practices can offer a package deal that can help you get CoolSculpting and skin tightening treatments at the same time, cutting you down on costs and time spent going to your provider.

Skincare Products

Finally, skin products that specifically target the skin (like retinol or collagen supplements) work well to boost the effects of your CoolSculpting results. Since it's only meant for fat reduction, even a basic skincare routine can leave your arms smooth and toned after all the treated cells get removed by your system. You don't have to match your skincare products with the CoolSculpting treatment, though you can ask your provider if they have specific recommendations that you can use.

Aside from this, skincare products can also help maintain the results of your CoolSculpting treatment. Keep in mind that while CoolSculpting sessions can remove the fat in the treated area, your body can always make more in the case of sudden weight gain. These situations can be addressed with the right diet and exercise, but having a comprehensive skincare routine also helps.

These treatments aren't required every time you get a CoolSculpting session finished, but they can be extremely useful for making sure that your results last for a long time. There are also a variety of other treatments you can consider aside from the ones recommended, but it's best to consult with your cosmetic practitioner or dermatologist about the methods that can give you the best results.

Get Rid Of Upper Arm Fat Without Getting Loose Skin at the NJ Center for CoolSculpting

Getting a CoolSculpting treatment can give you an effective arm lift without you suffering the effects of skin laxity or loose skin directly after the fat reduction procedure is done. When the procedure has precise application, fat deposits and flabby arms can be easily removed without the need for a plastic surgeon or skin tightening treatments. An experienced provider can provide the necessary body contouring services you need to get rid of stubborn fat and provide long-term results that you'll certainly enjoy.

Take the first step toward achieving your ideal body shape with us here at NJ Center for CoolSculpting. Call us at (908) 628-1070 to book an appointment now.

Freeze Away Your Stubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!


Upper arm fat is one of the most difficult types of body fat to remove by conventional means. Even if you manage to get rid of the unwanted fat in the treatment area, there's always the risk of getting rid of subcutaneous fat in the process as well. Combined with the invasive procedure of most conventional fat removal options like liposuction, alternatives like a CoolSculpting treatment are where you can find better results.

But can a CoolSculpting treatment effectively remove fat from the upper arms? While it's not a straightforward way of fat reduction like an upper arm lift or liposuction, it's an effective method of getting rid of excess fat without needing a plastic surgeon or getting sagging skin in the process. With the right applicator, it's possible to perform precise body contouring with a single CoolSculpting session.

Freeze Away Your Stubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!

How CoolSculpting Results Can Give You Slim Arms

A CoolSculpting treatment works on excess fat by using a fat freezing process to prevent it from turning into hard-to-remove body fat. This method kills the treated fat cells from the inside, so the treated area can't gain any more fat. After the treatment, the dead fat cells are slowly drained from your body in the form of waste, leaving you with a perfectly toned area with no loose skin.

CoolSculpting treatment areas usually include the thigh (both the outer thigh and inner thigh) and abdomen (usually to remove belly fat from the lower abdomen), though it can also be used on other areas that need fat reduction with the right applicator. Issues like a double chin, bra fat, and even a tummy tuck can all be managed with a CoolSculpting treatment, as the procedure doesn't discriminate on the location of the fat deposit, especially if it's visceral fat.

Stubborn arm fat, in particular, works well with CoolSculpting because it avoids the skin laxity that other treatment options for fat reduction can leave after the procedure. If you're going to have a lot of stubborn arm fat removed, you may need extensive skin tightening treatments to make sure that the area doesn't remain flabby even after all the fat is gone. Since CoolSculpting melts the fat from the inside and gradually removes the treated fat cells, you're less likely to experience skin laxity and sagging skin.

With the use of a tool like the CoolSculpting Petite applicator, it becomes even easier to use fat freezing on smaller, more densely packed fat deposits in the upper arm. Excess fat like armpit fat and upper arm fat can now be removed as precisely as you want to, without the fear of also affecting the necessary subcutaneous fat underneath. Combined with the right skin tightening therapy, your CoolSculpting procedure can tone, trim, and overall improve your flabby arms into the curves that you've always wanted.

How Can I Make the Results of My CoolSculpting Treatment Last Longer for My Arms?

Closeup female's arm

The fat freezing process removes the ability of treated fat cells to grow and stay underneath your skin, so you effectively don’t grow any more fat in the treated area unless you experience weight gain again. This makes CoolSculpting treatments excellent permanent and semi-permanent solutions to fat reduction since all it takes is one or two treatments for the fat freezing process to work on the treated cells.

The best way to prolong the results from your CoolSculpting treatment is to stick to a rigorous diet and exercise plan (or weight loss if you need to lose more fat overall) since the body’s ability to regrow fat cells isn’t removed with CoolSculpting treatment. And while CoolSculpting can be an effective way to reduce fat in the treated area, there’s always a chance that your body can start accumulating fat there again depending on your lifestyle.

However, nothing is stopping you from getting another CoolSculpting treatment if the treated area starts accumulating fat again. Since CoolSculpting is a non-invasive method that melts the fat from the inside, it’s unlikely that you’ll face any serious side effects or complications from having it performed more than two times during your lifetime. But for safety’s sake, you should always inform your doctor about any potential fat reduction therapies you’ll try.

What Other Things Can I Do to Treat Flabby Arms?

While CoolSculpting by itself is an extremely effective way of reducing stubborn arm fat, you may want to consider other methods of treating arm fat if you think you need a little more work done. Some of these methods don’t really work for fat reduction specifically, but they can improve the skin of your flabby arms and help it look much better after your CoolSculpting treatments.

Skin Tightening Treatments

Skin tightening therapies like radiofrequency or ultrasonic therapy boost your skin’s ability to regrow lost cells, essentially giving your collagen production a boost to produce healthier, livelier skin. It’s an excellent treatment to follow up CoolSculpting since it can help your skin look much better and tighter after your fat reduction procedure, especially if a lot of fat had to be removed.

Cosmetic Injectables

Dermal fillers are some of the most popular cosmetic treatments used to fill in areas of the skin that may have experienced significant fat loss or skin laxity after fat reduction treatments. They’re easily accessible through most dermatologists and cosmetic practices and have little to no side effects or post-operative recovery associated with their use. This also makes them extremely compatible with CoolSculpting results as they progress over time.

Cosmetic Surgery

Finally, if you do want a more straightforward way of removing fat, cosmetic surgery is still an option. Keep in mind that body sculpting via surgery can be extremely invasive and require significant time and investment in both the procedure and recovery. If you’re thinking of surgery, check with your CoolSculpting provider if you can’t obtain the same results with your CoolSculpting treatment.

Aside from these methods, simply keeping your skin and body in good shape is an excellent way to prevent your body from developing fat again in your treated area.

Remove Stubborn Arm Fat With Fat Freezing Treatment at the NJ Center for CoolSculpting

Getting a CoolSculpting treatment is an excellent way to reduce the fat cells in your upper arm since any fat deposit gets frozen off and removed with one or two treatments. If you use the right CoolSculpting applicator, the entire procedure is even easier since any stubborn fat in the treatment area can be easily reached during the CoolSculpting procedure. With a skilled CoolSculpting technician, you'll never have to worry about stubborn fat deposits ever again.

Take the first step towards achieving your ideal body shape with us here at NJ Center for CoolSculpting. Call us at (908) 628-1070 to book an appointment now.

Learn more: How CoolSculpting Can Help You Avoid Loose Skin in the Upper Arms

Freeze Away Your Stubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!


There have been online talks, videos, and blogs about freezing fat away at home since CoolSculpting came out as a proven fat reduction procedure. Since some people could not afford getting a CoolSculpting procedure, many at home kits and devices have surfaced. There have been fat freezing devices created with cold packs that are chilled in the freezer and placed on the body in hopes to reduce visceral fat and for weight loss. It is believed that it works the same way that CoolSculpting does by freezing the fat from areas of the body such as the abdomen, thighs and upper arm.

So is CoolSculpting at home effective to reduce arm fat? Attempting at home CoolSculpting procedure is not recommended for any body area. DIY CoolSculpting kits often involve ice packs and other frozen material with a low quality applicator. It is done in an effort to freeze fat cells. However, applying ice at home only freezes your skin and does not get rid of any fat cells. One of the main concerns with freezing fat at home is that the methods are not FDA-approved and there are no clinical trials to prove its effectiveness.

Freeze your Fat away today at the NJ Center for CoolSculpting

Arms CoolSculpting At Home 

CoolSculpting is ideal for treating the flabby arms. It works by delivering suction and precise cooling to the coolsculpting treatment areas with customized applicators which are also called handpieces. CoolSculpting treatments rely on cold-induced cell death, or cryolipolysis, to achieve results. Multiple scientific journals have verified that cryolipolysis produces long-lasting fat loss and noticeable differences in appearance. 

Can I Do CoolSculpting At Home On My Arms?

At home CoolSculpting treatment involves the use of freezer packs, ice cubes, dry ice, cryotherapy, and knock off devices to try to get rid of stubborn fat. During a CoolSculpting fat freezing treatment, the CoolSculpting technician will carefully monitor the temperature of your skin, making sure not to leave burns and damage tissues on your body. After properly observing the skin temperature and the body's vital signs, the temperature given out by the device would be adjusted to deliver the best possible results.

Without the necessary suction to pin fat to the skin's surface, and without a controlled source of cooling that is designed to maintain a safe temperature for long enough to freeze fat deposits in the lower and upper arm, at home CoolSculpting should not be done at home. At home arm CoolSculpting will not freeze your upper arm fat, but it very well may freeze your skin.

At home CoolSculpting methods using ice packs, straps, dry ice, cryotherapy, or knockoff devices are simply not sophisticated enough to deliver safe or measurable fat reduction. 

How Safe Is Arms CoolSculpting At Home?

CoolSculpting is only considered safe when performed by licensed professionals with FDA-approved equipment. It can be done by plastic surgeons, dermatologists, and med spas that perform cosmetic dermatology.

Each Coolsculpting machine comes with a variety of safety measures. This fact is why receiving your treatment from a reputable medical spa is the only way to ensure your safety and wellbeing. The safety mechanisms include gel pads that protect the skin from frostbite and temperature sensors that monitor the skin temperature during each treatment.

Do Ice Packs Work?

The type of controlled cooling needed to freeze body fat to a temperature to trigger apoptosis is not possible with ice. Your body is too warm, the ice melts too quickly, and it takes selective targeted cold to make CoolSculpting work. 

While your freezer can chille items to -18°C, which is about the therapeutic range of CoolSculpting. But that -18°C ice pack from the freezer will get warm within minutes of putting it on the skin, as it absorbs the body's heat. There is no sustained cooling, which means no measurable fat reduction.

Because in order to achieve a natural-looking result with CoolSculpting for arms, you will need to ensure full coverage of the fat-pad. Fat-pads have multiple sizes of handpieces and you may need one handpiece or three handpieces to achieve the coverage you are looking for on each arm.

Why Home CoolSculpting Is Not Effective

CoolSculpting is considered an elective cosmetic procedure, so it is not covered by health insurance. This is one of the main reasons why many people opt for at home CoolSculpting remedies in order to save some bucks. However, the actual CoolSculpting procedure is not done at home. CoolSculpting should only be performed by licensed professionals in doctors' offices and med spas with the FDA-approved CoolSculpting equipment.

Here are some of the reasons why at home CoolSculpting is not effective:

1. CoolSculpting at home cannot deliver consistent temperatures.

CoolSculpting destroys fat cells by freezing them.  The process created to freeze fat cells at a precise temperature so as to not damage the surrounding tissue is called Cryolipolysis. The cryolipolysis reaction requires that the cold temperatures be maintained for a long duration. This presents a significant challenge for those trying to perform at home CoolSculpting with ice packs. There is no easy mechanism for getting an ice pack to the required temperature, nor any way to keep that ice pack at that temperature for the necessary amount of time. 

Specifically, the CoolSculpting machine gets down to between -11 and -15 degrees celsius for a specific time to trigger the cell death. There is a thermometer that gauges inside of the CoolSculpting handpieces to monitor the temperature of the skin and underlying excess fat, to ensure fat freezing.

2. Insufficient suction from CoolSculpting home device.

CoolSculpting relies on the suction from the applicator to be effective. Suction ensures that subcutaneous fat stays towards the surface of the skin, allowing the cold to penetrate the fat cells. The applicator also exposes fat to the cold from multiple angles, which causes the cells to rupture and die in a reasonable amount of time. At home CoolSculpting devices such as lipo-belly have no way to generate comparable suction, and so any attempt to freeze the fat will ultimately lead to dead fat cells.

3. CoolSculpting at home can pose health risks.

Prolonged exposure to super-cold temperatures on the skin is dangerous. It can cause burns and severe tissue damage. For these reasons, freezer packs and dry ice should never be used for any sort of at home CoolSculpting.

To protect against dangerous thermal events, CoolSculpting uses a patented freeze detection system to ensure that temperatures are maintained in a safe range throughout coolsculpting treatment treatment. This feedback system collects temperature data from the surface of the skin. If the tissue becomes too cold, the machine adjusts its output, or will abort the treatment altogether

CoolSculpting also uses specially designed pre-treatment area wipes and fructose-based gel pads to protect the surface of the skin during treatment. This insulates the treatment area from thermal injury and prevents frostbite, allowing better cooling of the underlying fatty tissue.

Why CoolSculpting Should Be Done By Professionals

Despite the simple idea behind fat freezing, CoolSculpting is a highly modern medical treatment that simply cannot be replicated at home. CoolSculpting uses patented technology to deliver safe and effective results, and requires application by a body contouring specialist to get aesthetically pleasing results for stubborn fat deposits. Medical supervision is required to make sure that you are safe during a fat freezing treatment. Proper supervision is needed to check whether the procedure is done correctly. This will also guarantee that proper protection for the treated area is in place. 

CoolSculpting is a skill sensitive technique. Expertise along with proper coolsculpting applicator and coolsculpting handpiece that plays a role in your overall unwanted fat reducing results. It is important to ask the doctors, technicians, and nurse practitioners that they are trained to operate the CoolSculpting equipment. If not operated correctly, not only will your results be minimal, but it can cause you harm when not properly administered. It can lead to nerve damage, skin pigmentation, and even uncomfortable lumps. Medical professionals and clinics have the right equipment to deliver safe and effective treatments to eliminate stubborn arm fat. 

How Much Does Arms CoolSculpting Cost?

The price for CoolSculpting depends on the area of the body being treated and the size of the applicator. A larger applicator for the abdomen will take longer and be more expensive than the smaller CoolSculpting applicator for double chin or arms. The more areas of treatments needed, the greater the overall cost of the procedure.

A typical price for a single CoolSculpting session to treat both arms is around $1,500. How many sessions you need will depend on where you are getting the fat removed and how much of it needs to be removed. Unless you have a severe case, one treatment should be enough for most areas. 

Safely Eliminate The Fat On Your Arms With NJ Center Of CoolSculpting

At the NJ Center of CoolSculpting, we offer safe and effective CoolSculpting results to help you feel more confident. With the CoolSculpting procedure, it is important to do this method under proper supervision to prevent any problems from occurring. We provide customized aesthetic procedures to help eliminate and reduce stubborn fat cells in the abdomen, thigh, stubborn bulges in the back, double chin, and bra fat. Our team utilizes the latest advances in non-invasive cosmetic treatments and technologies.

For more information about the NJ Center of CoolSculpting and our services, you may give us a call and set an appointment with one of our medical practitioners. 

Freeze your Fat away today at the NJ Center for CoolSculpting

Coolsculpting has become a recent trend in the cosmetic industry. Proven to be a safe and effective way to help reduce fat cells in areas of the body, CoolSculpting may be what you are looking for when it comes to getting the toned look you want without having a surgical procedure. For problem areas, arm fat appears to be among the most difficult areas to get rid of fat. Fat freezing arms has become a popular solution for individuals searching for tighter, healthier looking arms.

So is coolsculpting on arms with tattoos safe? Yes, CoolSculpting is a safe procedure even for arms with tattoos. CoolSculpting is a non-invasive procedure that has minimal to no side effects. The temperature that the tissue is subjected to has an effect only on the fat cells in the target area and will not damage skin.

Freeze your Fat away today at the NJ Center for CoolSculpting

Can CoolSculpting Affect Tattoos?

It is not uncommon for patients to have questions about tattoos when they think about getting a CoolSculpting treatment. After all, body lifts do involve extensive areas of skin, and regions like the abdomen, arms, and thighs are popular spots for tattoos. 

Is It Safe To Get CoolSculpting With Tattoos?

Over the years, CoolSculpting has been proven to be safe, non-invasive, and pain-free. Clients who are worrying about their tattoos getting ruined after a CoolSculpting procedure should not be worrying at all. Since CoolSculpting is FDA-approved, it is non-invasive and does not create any type of significant damage to the surrounding tissue or injury to a patient.  

CoolSculpting uses very cold temperatures to target unwanted fat. Freezing the area causes the fat cells to be destroyed so the body can eliminate the excess body fat for good. This cryolipolysis process destroys the fat cells but does not cause lasting damage to your skin. The procedure will not be harmful for skin with tattoos. However, depending on how much fat is reduced, distortion of the tattoo may happen and the tattoo ink might fade once the fat is visibly reduced.

It is normal to experience minor side effects after the treatment. As coolsculpting results, your skin might look red and slightly swollen or bruised for a short time. You might experience temporary stinging, aching, itching, and tenderness in the area. These minor side effects should go away naturally after a week or two.

Will My Tattoo Be Erased?

The procedure alone will not erase any of the tattoos present on the target area. The CoolSculpting treatment is designed to contour problem areas without harming the skin. 

This treatment will not mirror effects of tattoo removal procedures such as laser tattoo removal or other laser treatment. One benefit of body contouring procedures is that they can be customized. Your surgeon can take the presence of tattoos into consideration as they create your personal treatment plan.

However, as CoolSculpting is done to contour the arms and other body areas, it could have a slight effect on the appearance of the tattoo. CoolSculpting removes 10 to 20 percent of the fat targeted with each treatment. Depending on how much excess fat will be removed in the arms, the tattoo appearance may also be reduced.

Contouring Your Arms With CoolSculpting

How Does CoolSculpting Work On The Arms?

 A specially designed cool sculpting applicator is used to address the unique contour of the upper arm. Depending on the size of the area being treated, different-sized applicator plates are used.

The CoolSculpting handpieces deliver suction and precise cooling to the treatment area. The ideal temperature for fat cell death is between 39 and 41 degrees Fahrenheit. The subcutaneous fat layer of the upper arm is cooled to the point that fat cells begin to die. The surrounding nerves, skin and muscles are unharmed by the process.

Most patients require between 1 to 3 CoolSculpting sessions for optimal results. The number of treatments needed depends on the individual's response to the procedure. It also depends on the extent of fat reduction the patient is hoping to achieve.

Freeze your Fat away today at the NJ Center for CoolSculpting

Getting Rid Of Flabby Arms With CoolSculpting

For many men and women, no amount of diet or exercise can adequately address stubborn arm fat. For some, genetics plays a factor in how much fat will collect in the upper and lower arms and how elastic the skin will be as you age. The aging process breaks down the collagen that gives the skin its firmness and elasticity, so bat wings are sometimes an unavoidable consequence. Fluctuations in weight can also play a role, especially if you have lost a significant amount of weight quickly.

CoolSculpting technology can be done on your arm to remove the fat deposits creating that stubborn bulge in the arm. This procedure is non-invasive and will freeze the subcutaneous fat deposits in your upper arm. On average, CoolSculpting can remove around 20% of treated fat cells from the treated area which will result in a more toned appearance and eventually get rid of the flabby arms.

Other Areas Treated With CoolSculpting

coolsculpting machine


The stomach is one of the most common places the body stores stubborn fat cells so it can be very hard to reach this area with diet and exercise. This is also the most common area people want CoolSculpting to be done. Depending on which area of the abdomen you want to treat, you  might need DualSculpting or multiple treatment sessions.


Thigh fat can be particularly stubborn but CoolSculpting produces good results on the inner thigh and outer thigh areas. The skin on the inner thighs is usually easier to pinch and to feel surface fat. Fat on the outer thighs or "saddle bags" is harder to pinch but is still usually made up of the right tissue to be able to treat with CoolSculpting.

Chin Area

CoolSculpting can even treat visible bulges under the chin and contour the neck. Freezing fat away from a double chin is as easy and tolerable as using the CoolSculpting procedure in other parts of the body

Love Handles (Flanks)

The love handles are those areas of stubborn fat that often form on a person's sides. Bulges at the sides of your waist, or "love handles," respond incredibly well to CoolSculpting, even when weight loss has not seemed to shrink them. 

You can either treat your flanks one after the other, or you can treat both at the same time. Known as Dualsculpting, the process lets you double your results from the treatment in half as much time.

Back Fat

Coolsculpting is very effective for treating visible fat bulges on certain areas of the back. The three most commonly treated areas are the parts of the lower back that extend from the love handles, the mid-back fat on the sides, and bra fat under the bra line. 


Coolsculpting can help remove unwanted fat cells in the breast area in men who suffer from gynecomastia, or enlarged male breasts. The treatment is not effective for all men with enlarged breasts but it can help reduce breast size due to extra fat. If there is a lot of breast tissue, surgery might be a better option to remove the actual breast tissue.

Get Rid Of Excess Arm Fat With CoolSculpting

NJ Center for CoolSculpting is a state-of-the-art med spa in New Jersey staffed by the best CoolSculpting experts in the region. Our facility specializes in the CoolSculpting session, allowing us to offer options like DualSculpting and CoolMini treatments for small areas such as your arms. 

Give us a call today and schedule your initial CoolSculpting appointment.

Freeze your Fat away today at the NJ Center for CoolSculpting

Stubborn pockets of excess fat are some of the most common aesthetic complaints brought to cosmetic practices and plastic surgeons around the country. Even if there are treatments that are medically cleared and effective at removing unwanted fat like liposuction, some stubborn bulges don't budge so easily. And while there are various treatments out there that can get rid of fat pockets, you should never try one without checking if it's been approved by the Food And Drug Administration.

So why is it such a big deal that the CoolSculpting system got FDA approval, and what does this mean for the future of fat removal? FDA approval for CoolSculpting ensures that any fat freezing procedure you get with this system not only removes stubborn fat cells, but they do so safely and efficiently. Combined with the right CoolSculpting applicator, you can effectively fast-track removing unwanted fat cells with a single CoolSculpting treatment.

Freeze your Fat away today at the NJ Center for CoolSculpting

Why FDA Approval Is Such A Big Deal: Cleared vs Approved

One thing to understand about FDA approval is that it's not actually the only way a procedure can technically be deemed "usable" by the FDA. The two ways a product can be evaluated safe for use are "FDA approved" and "FDA cleared".

FDA-approved products have been rigorously tested and designed to be market-ready and have benefits that vastly outweigh any associated risks when using them. Manufacturers usually have to go through a series of tests, certifications, and other authorizations before the FDA finally approves their product for use.

On the other hand, FDA cleared products only need to prove that they work similarly to another FDA-approved or cleared product to get market access. While this can be great for encouraging innovation and competition in particular niches, the problem comes when these clearances are based on outdated FDA-cleared products that no longer work or have been disproven in their efficacy.

To put it simply, FDA approval is much better than FDA clearance since you're sure that product has gone through its own battery of tests and certifications, so it's more likely to have gone through close examination for efficacy and safety. More than that, you have the guarantee that the procedure or product that you'll buy is up to date on the latest research and safety measures required from that product.

How A CoolSculpting Treatment Safely And Efficiently Removes Fat From the Treatment Area

Coolsculpting arms

One thing that can make a CoolSculpting session ideal for removing excess fat is that it doesn't take away needed fats like subcutaneous fat from the treated area. Methods like liposuction and arm lifts may sometimes remove needed fat and damage surrounding tissue, which is one of the main complaints about traditional fat removal procedures.

A CoolSculpting treatment avoids this by using fat freezing on the fat deposits to remove their ability to expand and grow into fat over time. The fat freezing process destroys the treated fat cells from the inside, and then they get removed naturally by the body as waste. As a non-invasive method of getting rid of fat cell deposits, it's steadily grown as an alternative to liposuction, arm lifts, and other ways of removing fat.

CoolSculpting treatments work on a variety of fat deposits, like:

It's particularly effective at getting rid of fat in the upper arm area and unwanted arm fat since body contouring can help you get to your ideal weight without sacrificing the CoolSculpting results you want with your body. Even difficult places like a bra bulge can be easily managed with the targeted treatment that CoolSculpting provides.

One thing that can make this better is by using CoolAdvantage petite applicator, since it's easier to get more stubborn areas of fat like the armpits. Since the size of the CoolSculpting applicator determines how effective the treatment area is and how much fat can be removed. The Coolpetite applicator has also been approved for use by the FDA, so you can count on it to give you an effective and safe fat reduction.

What Are The Risks Of Getting Non-FDA Approved Fat Reduction?

You might have seen promotions or marketing about other methods of fat reduction – these advertisements usually have lower prices and promise faster results than FDA-approved procedures. While they may seem appealing on paper, there’s a definite risk to getting these procedures since you don’t have the same quality of safety and efficacy as FDA-approved products.

One way to make sure that the treatment you’re getting is legitimate is to check if your provider has licenses and certification to perform the procedure that you’re undergoing. Do your research, ask around with other patients, and check their paperwork before signing anything. Because fat reduction treatments can’t be reversed, you must make sure that your chosen provider/practice is properly trained and experienced with the procedure and equipment.

Keep in mind that this is already on top of the consideration that fat reduction isn’t covered by medical insurance, you’ll need to make sure that your money is well spent on the fat reduction treatment you’re going to get. Make sure to check with your doctor and dermatologist if you’re looking for fat reduction treatments to ensure that they won’t clash with any pre-existing medications or conditions you may have.

Non Invasive Fat Reduction With The NJ Center For CoolSculpting

As an FDA-approved treatment for stubborn fat bulges, the CoolSculpting system can work wonders for body contouring in the targeted area without any need for invasive methods like liposuction or arm lifts from a plastic surgeon. Combined with a strict fat loss regimen and skin rejuvenation treatments, your CoolSculpting procedure can give your body the glow-up that you've always dreamed of.

Take the first step towards achieving your ideal body shape with us here at NJ Center for CoolSculpting. Call us at (908) 628-1070 to book an appointment now.

Learn more: Does CoolSculpting Work for Flabby Arms?

Freeze your Fat away today at the NJ Center for CoolSculpting

Stubborn fat deposits can be some of the most difficult things to remove since it can be easy to confuse it for much-needed subcutaneous fat that we need to keep our bodies healthy. But if you want to remove excess fat from your arms, a CoolSculpting fat freezing procedure may just be the thing you need to get rid of stubborn fat cells.

But how exactly can CoolSculpting technology treat stubborn arm fat, and is it really the best solution for getting rid of unwanted fat? Because each fat cell in the CoolSculpting treatment area is effectively removed of its ability to contribute to weight gain, it's an excellent way to get rid of a fat bulge permanently without liposuction. In addition, the CoolSculpting results can be tailored to the patient's desired contours, allowing for greater flexibility and freedom with the final look.

Freeze your Fat away today at the NJ Center for CoolSculpting

How CoolSculpting Works On The Fat Stores In The Body

Fat is an essential part of the body's normal functions - but one reason why unwanted fat cells can pose a problem is that they can get in the way of your body working properly. Aside from giving you sagging skin, unwanted fat can also lead to serious health issues if left unattended.

Arm fat in particular can be tricky since unlike the fat you can find in the abdomen, thigh, or even a double chin, fat arms can suffer from skin laxity even after the fat cells have been removed. While this can be remedied by skin tightening treatments like dermal fillers, procedures like brachioplasty and other arm lifts can make repairing the skin difficult.

CoolSculpting works by freezing the treated fat cells without affecting the surrounding tissue, which is a common issue that usually gets in the way of the results of other fat removal methods like liposuction. These fat cells are frozen from the inside, removing their ability to grow and expand, and are excreted naturally by the body in a few months. Non-invasive and requires little to no post-operative recovery, CoolSculpting treatments have proven themselves as a popular alternative to most arm lifts offered by a plastic surgeon.

This is why CoolSculpting works exceptionally well for excess fat on the upper arms since it can be used to make sure that the treated fat cells are less likely to sag and sink after the procedure is done. While the CoolSculpting fat freezing procedure already excels at getting rid of stubborn fat cells from areas like the inner thighs, the outer thigh, and other places that have stubborn fat bulges, CoolSculpting results can be even better when combined with the CoolAdvantage petite applicator.

Why The CoolPetite Applicator Is The Best Way To Get Rid Of Fat Deposits On The Arm

While arm CoolSculpting can be done with the right applicator, the recent approval of the CoolAdvantage petite applicator can better reach smaller and more stubborn fat bulges in the arm, such as the ones found around armpit fat. These bulges can often be difficult for medium and large-sized applicators to reach, leaving some treated fat cells still able to absorb fat and grow over time.

Combined with effective weight loss regimens and other skin tightening treatments, all you need is an hour with a CoolPetite applicator to get rid of stubborn fat deposits. While the results may not be as immediately visible compared to other methods like liposuction, they're much more long-term and non-invasive. You can even combine them with other CoolSculpting treatments around other fat stores in the body for a comprehensive way to remove any stubborn fat and sagging skin at the same time.

Because CoolSculpting is the only FDA-approved non-invasive method to treat upper arm fat, you can rest easy that your CoolSculpting results will be safe, effective, and last for a long time. The CoolAdvantage petite applicator comes with two interchangeable contours that are specifically designed to treat the excess fat in the upper arms, allowing your applicator pinpoint accuracy when removing stubborn upper arm fat. Combined with the overall effectiveness of the CoolSculpting procedure, you’re guaranteed to have excellent results once your body flushes out the treated fat cells from your system.

Can I Combine CoolSculpting With Other Weight Loss Treatments?

Absolutely. CoolSculpting treatments are non-invasive, so you accompany them with other skin tightening and weight loss treatments for a more comprehensive improvement of your skin and body. Keep in mind that there are some limitations to this option – depending on the type of skin tightening treatment or weight loss regimen you’re considering, your dermatologist or doctor may have recommendations on which ones you can and can’t follow.

One thing that you should keep in mind is that while CoolSculpting is an effective and efficient way to remove fat cells, it does not prevent future formation if you happen to gain weight again. For the best results from your CoolSculpting procedures, you should combine it with an overall weight loss regimen. Generally, you only need one to two CoolSculpting treatments to remove stubborn fat, but these results are only as good as your body’s diet.

Weight loss and skin tightening treatments are sometimes necessary after a CoolSculpting treatment especially with older patients, since they’re most likely to experience sagging skin even with minimal amounts of fat removed. And while CoolSculpting treatments are great at removing fat, they often need to be supported by other skin tightening treatments if a large amount of fat has been removed from the patient.

Fortunately, the duration of CoolSculpting treatments means that you have plenty of time to discuss weight loss options and other skin rejuvenation treatments with your dermatologist and/or aesthetician. If you can find a CoolSculpting provider that can give you a package deal on fat reduction and skin tightening treatments, you’ll be able to enjoy your CoolSculpting results for a long time, with the bonus of having tight and smooth skin in the treatment area.

CoolSculpting Treatment And Fat Reduction At The NJ Center For CoolSculpting

A CoolSculpting procedure can be an effective way to remove fat deposits in a treatment area, but you must get your procedure done with a licensed and experienced CoolSculpting applicator. Arm CoolSculpting with an experienced provider can not only help you get rid of flabby arms and armpit fat, but it also ensures that you'll never have to go to a plastic surgeon to get rid of stubborn upper arm fat ever again.

Take the first step towards achieving your ideal body shape with us here at NJ Center for CoolSculpting. Call us at (908) 628-1070 to book an appointment now.

Freeze your Fat away today at the NJ Center for CoolSculpting

Claim a coupon good for up to 50% off CoolSclupting®

*Claim 50% off 8 Cycles , 32% off 6 cycles, 25% off 4. Value $800/cycle.

What Our Clients Say About Us

  • "The treatment itself was not uncomfortable. Afterwords, I felt great. I didn't really notice anything for about 30 days. After day 30 until about a month later, I started noticing that my favorite jeans were not as tight anymore. I wasn't having to suck in to get them buttoned. And by that two month period after my CoolSculpting

    Lesley Hamilton

    Age 41

  • "It's subtle at first, and then a month later you look and go, "Wow - It really did something!" It really moved the bar for me, and I'm feeling better about myself already. It feels so good to put on anything and know I look as good as I've ever looked. And I didn't say that or feel that when I was in my 20's, 30's, and 40's."

    Anne McMarthy

    Age 56

Top crossmenuchevron-down